Mechanical Computer



[via Adafruit]

Comments

Post a Comment

Popular posts from this blog

Setting a Hermle w1217 Quartz Movement

Image
Here's a great post from Instructables on how to set the time and chime on an old w 1217 Hermle movement. This German-made movement was a pioneer in bringing a "real-sounding" chime to a quartz movement. If your older clock has one of these movements, and it doesn't work, it's more cost-effective to replace it with a more modern mechanism. But, if you just need to set it, here are some good step-by-step instructions on how to do so. From Instructables : Top left are the STOP and START buttons. Three knobs along the left side are also buttons. A knob in the center sets the analog hands. Upper right corner has the Make (Hermle) and Model# (1217) Lower right is the battery compartment. - The STOP button stops the analog movement and resets all digital settings. - The START button begins keeping time after you're done setting the clock. - Knob 1 sets the time in the digital portion of the clock. Turn the knob to the number you wish to set and press it until you...
Read more

More help with cuckoo clocks

Image
North Coast Imports is the best solution to providing cuckoo clocks of the best quality with the best service. We have 53 years experience. We go on to prove our excellence by providing the following answers to frequently asked questions. For further reference take a look at the sketch below. "My cuckoo calls three times and it's four o'clock." or "How can I get my cuckoo to call the correct amount of times on the hour?" ANSWER: This is a really simple fix. 1. Slowly turn the minute hand clockwise until the clock calls. If it calls once, let it finish and then proceed until it calls again. Count the number of times the cuckoo calls. 2. Carefully move the hour hand to the correct hour according to how many calls you just heard. For example, if it chimed 3 times, move it to the 3:00 position. 3. The hour hand is a friction fit on the hour-hand cannon. Press down on the base of the hand to firmly fix it in place. 4. When setting the clock, remember not to touc...
Read more

We are shipping again!

We have been shipping all of our delicious products for a few months now! We have a great special going on until the end of the month, so please give us a call or email to take advantage and stock your stores!
Read more